standard unit coolers, which is manufactured by buzcelik, is located in Refrigeration and Heat Exchange Equipment sector in B2B import export portal bysharing.com. Compnay buzcelik's products and services include standard unit coolers, BLAST FREEZER, CEILING TYPE COOLER which can be found under sectors Refrigeration and Heat Exchange Equipment. You may contact buzcelik in order to obtain detailed information related to standard unit coolers. You can get more information about companies that operate on exportation, importation, production and distribution of standard unit coolers on out page. You can convey your special queries on warranty period, delivery conditions, unit price of standard unit coolers through bysharing. Additionally, you can browse Agriculture Machinery and Equipment, Apparel and Textile Machinery, Building Material Machinery compaines located under Machinery sector.
|K SERIES / KSA Model |
Standart Unit Air Coolers
Fin Geometries : 32 mm x 28 mm
Copper tubes Ø 3/8"
V type aluminium fins.
The finned coils are designed with aluminium fins spaced at 6 mm, crimped onto copper tubes.
Header inlet and outlet tube connections made of copper.
Maximum operating pressure 21 bar.
Staggered copper tubes.
The coil circuit are designed for refrigerants R404A, R507C, R22, R134A, R407C.
Electrostatic powder coated RAL 9016 galvanized steel.
Stainless steel casing as optional.
Side panels are removable.
Hinged / Folding drain tray is standard for all models.
Intermediate drain tray.
Selection of a unit cooler with various fan number / diameter combinations offering the dimensional and air throw characteristics best adapted to the size of the cold room.
Selections should be confirmed by your Buzçelik Technical Specialist.
Standard or low noise level are available.
Different kinds of motors available as optional. (EC or AC)
Motor protection IP54 insulation class F.
Different kinds of accessories available as optional. (Axicool Fans, FlowGrid etc.)
Working conditions - 40°C/ + 50°C.
B1 type defrost system suitable for 0°C/ + 5°C cold room applications. Defrost heaters are applied on heat exchanger coil.
B2 type defrost system suitable for - 34°C/ 0°C frozen room applications. Defrost heaters are applied on both heat exchanger coil and drain tray.
Drain line heaters, fan housing heaters, hot gas defrost system and water defrost system are optional.
This facility enables homogenous heat distribution for fast and efficient defrosting.
A water defrost (WD) option is available for room temperature equal to or greater than + 4°C. In this case the unit cooler depth is increased amount of depth.
B1 (Optional) : Light electric defrost
B2 (Optional) : Electric defrost (coil + drain pan)
HGD (Optional) : Hotgas defrost (coil + drain pan)
WD (Optional) : Water defrost
The nominal capacities calculated according to Eurovent EN 328 standards that refer to SC1 – SC2 – SC3 conditions and are valid for R404A.